Just replaced hot water heater. Hot water is great, but not running to washer. Did I miss turning a knob

Turn off the hot water supply valve that the hose is connected to, then unhook both ends of the hose and see if there is a screen on either end. If there is, clean or just tear out the screen. Also check port that the hose hooks to on the washer for a screen, and clean it. Hope this solves your problem.

Hello mamasuz, you might need shut hot water side to washer and disconnect the hot water hose to your washer and try flushing out the hot side, and check the hose and see that it is clear of debre, as some hoses have a screen to catch debre that may otherwise flow into the washer, and also check the hot inlet hose connection to the washer to see if it is also clear of debre. Let us know what you find. Hope this solves the problem. Goodluck ----zeke----