Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Appliances (https://www.askmehelpdesk.com/forumdisplay.php?f=157)
-   -   How do I remove the (top) freezer back panel... looks like snaps in... no screws (https://www.askmehelpdesk.com/showthread.php?t=545960)

  • Jan 20, 2011, 12:30 AM
    sadru
    No screws, removal of freezer panel, ge fridge?
    I have a GE Top-Freezer Refrigerator, bought brand new 4 yrs ago, Model # GTA20LBNABB (20 CF). It has started to leak water and collects under the fruit & veg crispers. I think the defrost drain hole and tube may be plugged. I need to access the drain hole in the freezer compartment but there are no screws to remove the freezer back panel. It is snapped in tight. Can someone tell me how to "pull-out" the panel without damaging it or without breaking the retaining clips? There are several air-vents type "holes" in the panel. Do I need a special tool to pull?

    Once I pull out the rear panel I can clean the ice build-up and can clean the drain tube from there as I cannot see the tube from the back of the fridge... looks totally sealed system.

    Thank you for your help.
  • Jun 3, 2011, 08:48 PM
    mrjase
    We have the same model and we had the same problem. We had 3 different repair people offer different solutions of how to fix it to no avail. Our eventual resolution? We bought a new fridge.

    Quote:

    Originally Posted by sadru View Post
    I have a GE Top-Freezer Refrigerator, bought brand new 4 yrs ago, Model # GTA20LBNABB (20 CF). It has started to leak water and collects under the fruit & veg crispers. I think the defrost drain hole and tube may be plugged. I need to access the drain hole in the freezer compartment but there are no screws to remove the freezer back panel. It is snapped in tight. Can someone tell me how to "pull-out" the panel without damaging it or without breaking the retaining clips? There are several air-vents type "holes" in the panel. Do I need a special tool to pull?

    Once I pull out the rear panel I can clean the ice build-up and can clean the drain tube from there as I cannot see the tube from the back of the fridge...looks totally sealed system.

    Thank you for your help.

  • Jun 4, 2011, 12:31 PM
    sadru
    Comment on mrjase's post
    Hi mrjase.

    Thanks for your reply.
    I am sorry that you had to buy a new fridge.

    I wasn't getting any suitable solution as well.

    What I then did was to unplug the fridge for 2 to 3 days to let it thaw completely to get rid of the ice build-up. It seems to have worked as I haven't had that problem anumore for the past 5 months.

    sadru

  • Jun 4, 2011, 12:32 PM
    sadru
    Hi mrjase.

    Thanks for your reply.
    I am sorry that you had to buy a new fridge.

    I wasn't getting any suitable solution as well.

    What I then did was to unplug the fridge for 2 to 3 days to let it thaw completely to get rid of the ice build-up. It seems to have worked as I haven't had that problem anumore for the past 5 months.

    sadru







  • Jun 4, 2011, 07:26 PM
    drtom4444
    Any time I am faced with such a problem I research it and then try different things until I find one that works. The only way there should be ice build-up is if you have a clogged drain or bad defrost system. Experiment, you have nothing to lose. DrTom4444
  • Jun 5, 2011, 08:45 AM
    sadru
    Comment on drtom4444's post
    Sun, Jun 05, 2011

    Hi drtom4444,
    I spent so much tome researching but wasn't getting anywhere... although I did get a lot of ideas somewhat related but no one has actually said "how to pull off the panel"... read my question carefully... and then tell me if you know how it can be done.

    Thanks.

  • All times are GMT -7. The time now is 05:14 AM.