My above dishwasher does not start anymore :'(
Any idea how to reset the board before I call a technician?
Thank you!

You can reset diswasher by pushing heated dry.. normal... heated dry.. normal. All lights will come on. Then push start followed by cancel... cancel. The diswasher will now run through the cycle but if it does not get to wash or rinse temperature on three consecutive cycles it will go in blinking and need to be reset again. You can set it as many times as you want . I have the same problem and believe it is related to quantity of water... supply pressure or supply water temperature.

You will find that the dishwasher will run for over 2 hours instead of the 87 minutes that it should take.

[email protected]