Ok my tub is full of water. I lifted the lever and nothing. I unscrewed the levr it came out without the wiehgt on it. No access panel and it is a tub and shower inclosure how do I fix this

Hi Bj...

Take a metal coat hanger and disassemble it and straighten it out, but put a little hook on one end. Then, you go fishing for the plunger... see image... ;)

The plunger has a cross member that should be pretty easy to hook so you can pull it up and out.

Good luck!

Mark

Quote:

---

Originally Posted by ;

I unscrewed the levr it came out without the wiehgt on it. no access panel and it is a tub and shower inclosure how do I fix this

---

No problem! Easy fix! You have lost the link to the bucket, (see image)
The vbucket or plug has a cross bar on top the linkage hooks to. What you have to do is take a coathanger , put a small shepherds hook,(see image) and go fishing. Once you retrieve the bucket you can replace the linkage and you're back in business. Good luck, Tom

Yes but my lever has a screw with a small nut on the end of it? Does that screw into the linkage? It is a tub enclosure jacuzzi tub with all plumbing on and outside wall the only access panel I have is to get to the jacuzzi motor. I can not even find where the front panel of the tub opens like my last tub did?

I fished it out. My set up had a screw connecting to a plastic piece and then another gold rod connecting to the plunger thanks for the help

Thanks for the update. Are you all fixed up now? Good luck, Tom