Am trying to install a programmable thermostat. I seem to have found the letter designations on the old thermostat for 'W', 'G', and 'Y'. The only two terminals left are 'RH' and 'RC' which were connected to the same wire on the old thermostat. The manual for the new thermostat is looking for a 24v connection and a common connection. Were the 'RH' and 'RC' connections on the old thermostat the common or the 24v. I suspect that the wire was the common connection and there is no wire for the 24v which would power up the new thermostat which would make sense since the thermostat can be powered by 2 'AA' batteries. Can anyone confirm this before I hook this baby up? Thanks.