I have a leak problem at the very end of the flexible hose at the nozzle. Water leaks out where the flexible hose enters the nozzle body. I have removed the end of the nozzle thinking that the washers at that location need replacement, but water still leaks out at the location where the hose enters the nozzle. Q- How do I dismantle the nozzle body? And is there another washer in that location?

Quote:

---

Originally Posted by ;

How do I dismantle the nozzle body? And is there another washer in that location?

---

Here's a cutaway of a sprayer head,(see image) let me know if you need more. Good luck, Tom

Hi guys...

Tom, casuch has a grohe ladylux that has a PULL OUT SPRAY on the spout... see image.

Casuch, it sounds like the hose itself has broken under the flexible metal casing and therefore will need to be replaced... the other hose connection is up under the sink/faucet.

Here, you'll need to purchase a replacement hose (see image) and remove the old hose to install the new one.

Here is one site where you can purchase a hose:

Grohe 46 092 000 Ladylux/Europlus Hose, Chrome at PlumberSurplus.com

Just make sure it is an excat match for your unit as there are 3-4 different ladylux faucets. Otherwise, you could try a local plumbing supply store... they should carry this in stock.

Good luck!

Mark