I am installing a new Shower in a two piece bathroom. Can I tap into the existing Hot and Cold from the sink or will this rob me of the pressure I will need. I am running at 60 psi off a well pump. The bathroom is 25 feet away from the pump.
![]() |
I am installing a new Shower in a two piece bathroom. Can I tap into the existing Hot and Cold from the sink or will this rob me of the pressure I will need. I am running at 60 psi off a well pump. The bathroom is 25 feet away from the pump.
If you're talking about tapping into the 1/4 inch chrome supplies then you won't have all that much volume to play with. Please explain what you are taking off from. Regards, TomQuote:
Originally Posted by Avenger 200
I am talking about tapping into 1/2 copper .
No problem, 1/2" supplies for the shower are acceptable. Good luck, TomQuote:
Originally Posted by Avenger 200
All times are GMT -7. The time now is 01:56 PM. |