It is a Kenmore 110.82873120. It leaks/drips a quart or more per load from the lower left front of the machine. Curious other observation: I hear a drip, drip with a burping sound and slight movement in the tub that coincides with the burp if I turn the washing machine agitation and/or fill off. #1. Possible Problems? #2. How do I open/tilt the machine housing to find out what is leaking?

Make sure the washer is empty. Pull it out far enough so you can get behind it. Remove the back and you can pretty much see everything operate when running. If you lift the top, it won't run.

Thank You!

You can "tip" me by checking"yes" Is this helpful? Thanks, Brian

The Virtual Repairman's Appliance Help :: View topic - Removing the Cabinet from Whirlpool & Kenmore washers

This shows the correct way to open a kenmore. Good luck