Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Honeywell RTH6350D (https://www.askmehelpdesk.com/showthread.php?t=522727)

  • Nov 3, 2010, 05:55 PM
    joneo99
    Honeywell RTH6350D
    I'm installing a Honeywell RTH6350D thermostat. I'm replacing an old thermostat with mercury and only two wires connected to it. Unfortunately, these two wires are not labeled. How would I hook them up to the new thermostat.
  • Nov 3, 2010, 06:49 PM
    Joshdta

    One to r one to w
  • Nov 30, 2010, 07:01 PM
    johnnyfive
    This worked! I also only had two wires and after spending over an hour and a half of following directions in the manual and every combination of Y, R, Rc, and jumper, I finally got smart and just looked it up online. So for anyone else, just connect one wire to R, the other to W and I also removed the jumper between R and Rc. Just fyi.

    Thanks!

  • All times are GMT -7. The time now is 07:38 AM.