Have low hot water pressure in my shower and sink faucets in the same bathroom. No problem with the hot water pressure in the other parts of the house. What could be the possible cause? Please help...

Hi it could be a few things ,pipes tosmall,limescale ,stop tap not fully open,instant water boilers can be slow filling of bath? or even air in pipe, gl

Hi Kinnes



Let's start with the basics, OK?

What kind of pipes do you have? Copper, galvanized metal (silver), Plastic... let me know?

Is this a new or old issue?

What floor is the bathroom on... 1st or 2nd?

If the bath is on the first floor check to see if you have a hot water shutoff in the basement that is dedicated to this bathroom. If there is a hot water shutoff there may be some sediment caught up in it, or it may not be fully opened, right? Check back with me in this case.

Otherwise, you may need to disassemble the valves and purge them to clear of any sediment/debris that may be getting caught up in the faucet/valve.

The shutoff under the sink should also be checked to be sure it is fully opened or clogged with sediment/debris.

Answer my questions and let me know what you think, OK?

Mark