I have a 44360 t-stat and a Advance Distributor product A/H and H/P ,NOW I hooked it up as diagram set up G TO G(fan) a/h to stat ,w1 (h/p) to W and BLK 1 /2ND heat(a/h) to w/b (stat) BLK com(h/p) to BLU com (a/h) to BLK to R/C stat ? OK R (h/p) to R (a/h) to R/H (stat) Y (h/p) to Y1 (stat) and O (h/p) to Y/O (stat) I removed the jumper r/c and r/h THE BLK com (hp) to BLU (a/h) not to stat.The heat pump comes on and off at set point in heating and cooling but in heating mode the (A/H) and 2 and stage heat still rund till I turn it off manually, help please