My dryer was squeaking so I took it apart to replace the front bearings. Now it doesn't do anything. IT was working prior to me messing with it. It has voltage, the start and door switch seem to be fine. If someone could point me in the right direction I would appreciate it.

I would unplug the dryer then using a jumper wire jump out the two wires going to the door swt . If it works then check the door swt for 3 prongs you might have put the wires on the wrong connectors . One way turns on the dryer door shut . The other will let the dryer turn on door open . If your swt has 3 prongs . Use a multi meter if you can to test ethere or . U should have colsed cir/when buton is pushed