Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Interior Home Improvement (https://www.askmehelpdesk.com/forumdisplay.php?f=171)
-   -   How do I fill an oversize hole for a gasline in the cement panel in my fireplace? (https://www.askmehelpdesk.com/showthread.php?t=518371)

  • Oct 19, 2010, 08:40 PM
    Matthew2585
    How do I fill an oversize hole for a gasline in the cement panel in my fireplace?
    It's a gas start fireplace, not more than five years old. The gasline is ran, but there is no ingnitor, and it's capped.
  • Oct 19, 2010, 11:32 PM
    creahands

    How big is hole?

    Use fast drying hydro cement. It is denser then normal concrete and drys to touch in about 10 minutes. Some dry faster.

    Chuck
  • Oct 20, 2010, 10:04 AM
    Matthew2585
    Comment on creahands's post
    It's a 3/4 inch gas line, and the hole is 1 1/2 inches. Don't know if that changes your answer or not.
  • Oct 20, 2010, 11:24 AM
    creahands
    Answer still the same. Use hydraulic cement to seal around pipe. Push as much as u can into hole.

    Chuck
  • Oct 20, 2010, 01:08 PM
    Matthew2585
    Comment on creahands's post
    Thanks. Much appreciated!
  • Oct 20, 2010, 04:04 PM
    creahands

    Good luck

    Chuck

    • All times are GMT -7. The time now is 08:57 AM.