Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Bryant Furnace - Code 13 on the circuit board (https://www.askmehelpdesk.com/showthread.php?t=510378)

  • Sep 24, 2010, 01:34 AM
    khurupt
    Bryant Furnace - Code 13 on the circuit board
    Hello,

    I have a Bryant furnace. It keeps flashing code 13 on the circuit board. I read the code and it says that the switch will reset after 3 hours. It also refers me to # 33 which gives more possibilities as to what the problem may be. However it does say to reset the limit or flame roll out switch manually or replace the fuse link. I also took the ignitor and had it tested and it checks out OK. I also replaced the filter.

    I would like to know how to manually reset the limit or flame roll out switch.

    Thank you.

  • All times are GMT -7. The time now is 06:08 AM.