![]() |
You will need to take the blower housing off the engine first .
Then probably remove coil.
Remove screen , bolt / nut holding the flywheel on . Will need a puller to remove flywheel . There are different tricks to removing one but a flywheel puller is the saftest way .
LUCK
Hi,
In the face of inadequate tools, I will loosen the flywheel nut and back it up to near the end of the crankshaft, place the ball-end of a ball pein hammer on the crank and strike the flat face with another hammer. The shock effect will loosen it in two or so blows.
Peace,
Clarke
All times are GMT -7. The time now is 11:22 AM. |