Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Will this work? (https://www.askmehelpdesk.com/showthread.php?t=499175)

  • Aug 17, 2010, 02:26 PM
    silvertone
    1 Attachment(s)
    Will this work?
    Im doing a small addition for myself and have a vague understanding of plumbing. This will be inspected I am just trying to see if this will meet code. Originally the washer just wyed into that 2" vent but I didn't think that looked right.Now Im questioning the shower/ lav venting. What do you guys think will this pass code here in NJ?


    Thanks
  • Aug 17, 2010, 04:21 PM
    speedball1

    Hey Silver,
    These tired old eyes are having a problem reading your drawing. Could you darken the lines and post again? Thanks, Tom
  • Aug 17, 2010, 04:31 PM
    silvertone
    2 Attachment(s)
    No problem. I appreciate your help!

    Another view, Thanks
  • Aug 17, 2010, 04:45 PM
    speedball1

    A fewn questions.
    What code do you fall under and does it allow wet vents? Is this installation on a slab or is there a basement? Why them extra dry vent next to the washer since you already have it vented?
    I'll wait on your reply. Cheers, Toim
  • Aug 17, 2010, 04:53 PM
    silvertone
    Hey Tom,
    I think its IRC code here but I don't know about wet vents. This will be above a crawlspace. About the washer, well l geuss I should have said a very vague understanding of plumbing, I was a carpenter long ago:). I take it that I don't need that vent ? Lol which is great. Again I appreciate you taking your time.
    Thanks
  • Aug 17, 2010, 05:03 PM
    speedball1

    This would pass inspection in my area. If it were a slab I'd request a 4" drain for the WC but my code ( SPC) allows 3" above ground,
    Since you've wet vented the shower I would take my drawing down to the Building Department and ask. Good luck, Tom

  • All times are GMT -7. The time now is 08:50 AM.