The CSA sticker on it says "Digital Timer Ca. No. TD 2200. Max. Load: 125VAC/60Hz, 15A/1875W, 1HP, interior use only. There is also a sticker on it which states: "Q.C. PASSED Code: 0410". However there is no model number on it as such. There are 7 buttons on it to program it but I don't know how. Can someone help me? Thx

If this is a Woods timer check out Woods Wire and cable products manufacture | Coleman Cable, Inc.. Navigating the site is interesting.

Model # 59377 Timer TD2200A
Set time: Press & Hold the CLOCK button. Same time press the Day button to select day. Hrs button for Hr & the Min button for Minutes. When the minute button is released the time will be set. Either holding down or repeatedly pressing the appropriate button will advance the days, hrs. & minutes.
There are 8 on/off setting Usint the blocks of days you can save programs capacity. Blocks of days are:
1. All 7 days
2. Individual days of the week
3. M,Tu,W,Th,Fri
4. Sat, Sun
5. M,T,W,Th,F,Sat
6. M,W,F
7. T,Th,Sat
8. M,Tu,W
9. Th,F,Sat
For each ON time and each OFF time the DAY, HRS, MIN must be set
Press the PROG button once to set the first on time- you will see "ON" and the number "1" This indicates that you can now enter the first On time. Press the DAY button to choose the required day or block of days, then set the hr & minutes using the HOURS & MIN buttons. Press the PROG button to validate this entry.
Repeat for the remaining 7 ON/OFF setting as required.
When you have set the required ON/OFF setting, press the CLOCK button to return the display to the clock. The timer will now be ready to operate.
You can check the settings you have programmed by pressing the PROG button repeatedly-each setting will appear on the screen