I Have A Brand New Washer ,but I Don't Have Any Water Pressure Leading Into The Washer Not Much Hot Or Cold ,but I Have Water Pressure Every Where Else In The House, My Room Mate Took Off The New Hoses And Turned The Water Valve On And We Still Have No Pressure This Washer Was Bought Yesterday It Take 4 Hours To Fill Up Just On Wash Cycle Can You Please Help Me, We Don't No What To Do Is There Maybe A Leak Down In The Celler Or What We Do Have Water Down There We Also Just Moved Into This House And We Are On A Well

To check the washer supplies turn off the water at the house shut off and remove the hose bibs. Check their seats for crud or debris. Now hold a bucket in front of the open pipes and turn the water back on for a minute to flush out the supplies. You should have a strong stream. If not click on back. After the hose bibs are checked and cleared reassemble. Don't forget to tape the threads. Regards, Tom