Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   Scan tool not reading car computer (https://www.askmehelpdesk.com/showthread.php?t=491702)

  • Jul 25, 2010, 10:40 AM
    JSGROG
    Scan tool not reading car computer
    My auto scanne is not able to read my trucks computer. It reads that a vehicle must be plugged in which it was. It is not the scanner because I tested that. The battery was replaced and the a.c. Did not work properly. I disconnected the battery to reset the a.c. And the engine light came on. Did I fry the computer?
  • Jul 25, 2010, 10:55 AM
    TxGreaseMonkey

    I'm not sure what is going on. The ECM may have taken a hit. Did you turn the ignition switch to ON, while you had the scanner plugged in? Have you tested all under hood and under dash fuses with a test light or multimeter?

  • All times are GMT -7. The time now is 07:22 AM.