Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   1/8th (https://www.askmehelpdesk.com/showthread.php?t=48657)

  • Dec 14, 2006, 09:54 PM
    cvb141
    1/8th
    What are the terms 1/8th and 1/4 bends mean?
    Thanks
  • Dec 15, 2006, 05:30 AM
    RickJ
    A 1/4 bend is 90 degrees:
    http://www.wonderbaby.org/images/lit...et-fitting.jpg

    1/8th is 45 degrees:
    http://www.go2marine.com/go2_structu.../115802F-t.jpg

    • All times are GMT -7. The time now is 05:42 AM.