I have a 94 Toyota 4wd that I'm currently rebuilding the 3.0 3vze engine on, I have had all machine work done on this engine and am installing all new parts. It has been almost a year since I took this engine apart and I have slept since then and my memory isn't what it used to be so my question is does anyone know of a good complete manual which shows how parts of this engine go back together? I know once I get started into it pieces of the puzzle will come together, I did put bolts in ziploc bags and labeled them as I took them out so that will be a big help but just need steering in the right direction so I don't end up putting parts on then taking them back off because I forgot to install something first... you get the idea... if anyone can help it would be greatly appreciated... thanks

Do you want to start with just reassembling the block? Files are too big to send through here, so I'll need your email to send the repair manual.

Anything you have will be a great help, there are a lot of parts to this engine and this is a first time rebuilding a toyota v6. I'm more used to the old model ford and gm engines, these newer engines with all the sensors and vacuum lines blow my mind. You can send info to [email protected] thanks

Thanks again for the manual and I'll be checking back with you on the heads. Thanks again... Great Information!!

You're welcome.

I'm getting close to installing heads, hopefully this weekend. You had mentioned to holler at you when I got to that point and that you had manual for head install. You have my email address and thanks a million in advance.

Considerate done.

I am about to tear into my engine to change out a blown head gasket... I was wondering if I could get emailed the same manual. My email is [email protected]

Thank you! Hope you can help!

Attachment 35642

If you will I would like a manuel emailed. I am in the process of rebuilding a 3vz toyota engine and could use the info. Thanks in advance for any help. [email protected]

I have the same problem as the other post I took my engine apart about 5 months ago and can't put it back to get I don't know how to put the bottom end together if anyone can help I would apprecait it so much?