Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Cars & Trucks (https://www.askmehelpdesk.com/forumdisplay.php?f=41)
-   -   97 wrangler,starts when cold but after it gets hot it dies,I replaced the cam sensor! (https://www.askmehelpdesk.com/showthread.php?t=479245)

  • Jun 13, 2010, 02:11 PM
    salvatrucha_303
    97 wrangler,starts when cold but after it gets hot it dies,I replaced the cam sensor!
    97 Wrangler dies after its been running for several minutes,It will star after its cold again
    Replaced the cam sensor because I scanned it after a check engine came on.
    I was told that the crank sensor may have to be replace as well, But I don't want to keep guessing,can any body help me please.Thank you.
  • Jun 13, 2010, 02:18 PM
    TxGreaseMonkey

    Try removing the Crankshaft Position Sensor, cleaning it with WD-40, and reinstalling it. I would definitely focus on this sensor.
  • Jun 14, 2010, 10:22 AM
    CaptainRich

    Yes, I'd focus on the crank sensor, too.
    Be advised: you may need to have the sensor "learned" by the ECM once removed and reinstalled.
    You may also need a software update to be certain you have the latest calibrations for optimum operation.

  • All times are GMT -7. The time now is 06:55 PM.