New construction - shower stall only, no tub. Price Pfister single handle control for shower. Not enough hot water as shower is cool, not warm or hot. Plumber was fired for other stupid stunts but now I need to warm up shower water temperature. Does Price Pfister have valve that is adjustable in the shower control? If so, where is it and can I get to ti without tearing apart everything just ot set the temperature for the shower? Thanks in advance for your help.

:D :D :D

I need the model number of your faucet. Have you opened up the faucet and checked the hot water inlet ports on the cartridge? To check to see if the valve's piped correctly when the valve's open turn the hot water on to flush the supply and to see if the water gets hot. Good lucki, Tom

It is mounted in the wall of a cultured marble shower stall. I do not have the box any longer so I can't get the model number off the box. It was an "Ashfield Satin Nickel" and it was made for the shower/tub combination. The tub part was plugged off and it only operates the shower part now. The faucet was purchasede within the past six months and it was not old stock at the time of purchase. If this does not tell you what you need, please tell me where the model number would be located on the faucet and I will get it for you.

Thanks in advance!

:D