Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   Irrigation system (https://www.askmehelpdesk.com/showthread.php?t=473295)

  • May 25, 2010, 08:33 AM
    rarando
    Irrigation system
    --------------------------------------------------------------------------------

    Irrigation system controller (Rain Dial #RD-1200 - James Hardie Irrigation). Also connected to system is a rain sensor.

    Used the "manual mode" for one zone with success yesterday. This a.m. the auto irrigation failed to run and I'm unable to modify any setting. Unable now to run manually. The "display" is frozen with code #1112 in upper right.

    All system "checks" have been performed; 9 Volt battery change, plugs, electrical connection. Please advise
  • May 27, 2010, 11:37 AM
    pants1

    How old is the timer?
  • Aug 6, 2011, 12:42 PM
    rescuewil

    I have the same problem. My controller was installed in 1997. Did anyone figure this one out?
  • Aug 6, 2011, 11:32 PM
    Milo Dolezal

    Hit "Reset" and Reprogram.

    • All times are GMT -7. The time now is 04:24 AM.