Replaced camshaft sensor and icm my 95 lesabre won't start after engine gets hot, can not pull codes and no tach working
![]() |
Replaced camshaft sensor and icm my 95 lesabre won't start after engine gets hot, can not pull codes and no tach working
Try replacing the coil packs--they may be breaking down under load (heat). I would also disconnect the wire going to the tachometer--sometimes, they can short out the ignition system. If the problem persists, try substituting a known-good ECM.
All times are GMT -7. The time now is 04:36 AM. |