We have just gone through an amazing rain and wind storm and all of a sudden the two toilets on our main floor have stopped flushing properly. The upstairs toilet is fine. The two toilets on the main floor (we are on a slab if that matters) flush but do not drain fully. They leave solid matter behind. If we leave the toilets for a lengh of time (an hour or so) the water levels go to normal and if we flush once they are fine. If we flush any more the same drainage problem happens. Our house is less than a year old so the problem cannot be old pipes. Could it have something to do with the wind and rain storm and the fact that our subdivision has its own sewage facility? I only ask this because we have lost power a couple of times already with the storm and I'm not sure if the sewage facility has lost power or not. But would a loss of power at that facility cause this to happen? Oh another fact is that our shower had water drain back into it and then emptied again. Very strange. Help!
