I got a new snow blower last year and used it once, worked great, this year it won't start. Primer is just pushing air, gas line is not bloked. I put I little gas in the spark plug cylinder and it fired up for a second. Gas is not going through the carb, is something stuck, what should I do. I did put stabil in the gas but didn't run it through the carb.

Stabil in the gas... and didn't run it to get it in the carb? That doesn't protect the carb from gumming up...
Does it have a fuel solenoid on the bottom of the carb? (big thing, has a couple wires out of it)
If not.. then it's the main jet.. just needs a good tear down (the carb) soaking in carb cleaner and all holes blown out with compressed air.