Hi :o

When I access a computer with IP ,which is in my LAN .
Then a error is occurred --No network provider accepted the given network path.

Suggess for this problem.

Check the IP address, name and make sure the resource is online.

Hi friend
First check it out server ip after that you give static ip in client I give small ex: if you are server ip 192.168.0.1, subnet mask 255.255.255.0 . U give the ip address in client 192.168.0.2 subnet 255.255.255.0 . After that go you are server in my computerright click on that you find a computer name in that network id there that network id write it on client system that same place

Quote:

---

Originally Posted by nnilesh

Hi :o

When I access a computer with IP ,which is in my LAN .
Then a error is occurred --No network provider accepted the given network path.

suggess for this problem.

---

I would need a little more information to know for sure what the problem is. However, you can do some basic troubleshooting yourself to determine a few things.

Are you able to get on the Internet with both computers? What SRINUT31 was trying to say is that you might be on different subnets. The problem may go beyond this. You can have the same subnet and still not be connected within a LAN. This can happen if you use a switch instead of a router to connect multiple computers to the same modem. A router is needed to give the computers within your LAN private IP addresses. It's the private IP address you need to use to connect to the computer.

To determine your private IP address in Windows, go to a command prompt. If you're not sure how to do this, click Start/Run and type cmd. Once you have a command prompt, type:

Ipconfig /all

Look for the line with your IP address... probably something similar to 192.168.1.2

That's the IP address you would use to find your computer. In most Windows systems you can find computers within a LAN by going into My Network Places/Entire Network/Microsoft Windows Network. The machines identify themselves within a workgroup. A quick way to change a workgroup is to right-click on My Computer, go to Properties, and under the Computer Name tab click on Change. Regardless of worgroup name, most Windows computers are able find one another as long as file sharing is enabled.

Considering all of this, certain router settings may be enabled which are causing you to be unable to see a computer within your network. Refer to your router manual to see if this is true.

If none of this is helpful, please post more information so I can troubleshoot a little further.

There's info about your error message on the Microsoft site:
http://support.microsoft.com/kb/127933