My ceiling fan remote control stopped working seemingly after it was dropped on the floor. The red light on the control goes on and off as expected but ceiling light and/or fan are not impacted. The battery was replaced (just in case) to no avail.

Figuring I have nothing to lose, I took the remote apart. When I use just the board and block of buttons it works. The moment I start putting it back together into the case - it stops.

Any suggestions?

TIA, Eugene

No idea, as you have it in front of you and I do not. Clearly it is a mechanical problem in the remote itself. It's possible something causes one of the buttons to stick when you put it back together.