While using my hair dryer this morning, it lost power and the GFCI outlet on the circuit started making a repetitive popping noise. I unplugged the razor charger on the GFCI outlet as well as the hair dryer and electric toothbrush on the non-GFCI outlet. I pressed reset, then test, then reset. The popping continued. It sounded like machine-gun fire. It didn't quit popping until I went to the circuit box and flipped the breaker off. Does anyone know what is going on with my outlet? Thank you.

I am sure the GFI outlet is now defective, and needs to be replaced. Not sure if the hair dryer caused it, ir if it is fine. Replace the outlet, and have the hair dryer checked. If there is any question, replace it also.

Quote:

---

Originally Posted by tkrussell

I am sure the GFI outlet is now defective, and needs to be replaced. Not sure if the hair dryer caused it, ir if it is fine. Replace the outlet, and have the hair dryer checked. If there is any question, replace it also.

---

Thank you very much for your response. Does an electrician need to replace a GFI outlet, or is it similar to replacing a standard outlet? My husband knows how to replace standard outlets, install fans, lighting fixtures, and light switches. Is it something he can probably replace? Thanks again.

I have replaced them with no trouble. Slightly more complicated than a regular one, but easy DIY. In addition to black or other color on brass screws and white on nickel plated ones, you must connect the feed wires to the ones marked line. If the outlet feeds anything else, it will be GFCI protected if its wires are connected to the load terminals. Some of what I know, I have learned by reading the directions that come with stuff. Never hurts.