Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Networking (https://www.askmehelpdesk.com/forumdisplay.php?f=76)
-   -   How to setup hawking PS12U print server (https://www.askmehelpdesk.com/showthread.php?t=455790)

  • Mar 8, 2010, 11:56 AM
    cast9710
    How to setup hawking PS12U print server
    I have the above device. I can not get into it to set it up with an IP address. There is no documentation on the website, it is an older model. It has 2 usb ports and ethernet. I have tried getting into the device to change the ip but does not come up either through the router nor directly from my PC. I was told all the default ips for Hawking are 192.168.1.250, but no go, I also found an article that said it was 1.2.3.4, bogus number of course, and still no luck. I need to get this print server hooked up, I can't stand not being able to print.
    Thank you!
  • Mar 8, 2010, 01:37 PM
    Scleros

    HPS12U or PS12U? The info available for HPS12U on Hawking's web site indicates admin/1234 was the default username and password on the original version. This version also appears to have a reset button which may default the device. If yours has a reset button try that, or contact Hawking support.

    Their PSADMIN tool may help locating the device based on it's MAC address.

  • All times are GMT -7. The time now is 03:08 AM.