Checked for flashing codes and found none. I don't know what else to do
This is regarding the question I had about my goodman furnace. It ignites but as soon as the blower comes on the flame goes out

Does the flame move when the blower kicks on ?

Quote:

---

Originally Posted by hixton

does the flame move when the blower kicks on ?

---

the flame goes out when when blower kicks on. Do you think that it might be the heat sensor ?

When the flame comes on how long does it take the blower to come on, and how long does the blower stay on before the flame goes out.

Quote:

---

Originally Posted by letmetellu

When the flame comes on how long does it take the blower to come on, and how long does the blower stay on before the flame goes out.

---

It comes on apx. 2 to 3 seconds after the flame comes on stays on for about 2 to 3 seconds after flame goes out.

It also seems to have a mind of its own. The turned the switch on the side of the furnace off waited 2hrs. Turned it back on & it worked. When I woke up this morning it the blower was putting out the flame it was 61 degrees in the house turned the switch off waited 15min. Turned the switch back on and it worked. Im stumped.

Did you clean the flame sensor?

Not yet I have steel wool to do so. Will definatley need to though.