Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement? (https://www.askmehelpdesk.com/showthread.php?t=440969)

  • Jan 30, 2010, 09:47 AM
    mr_ed1972
    I'm replacing an old 2 wire thermostat with a Hunter (#44155C). Wire placement?
    I'm not sure of the wire placement. I have a black and white wire attached to my old thermostat. The new thermostat has attachments labeled G, RC, Rh, Y/O, W/B, Y1. There is a jumper connecting RC and RH. Do I connect the black wire to RH and the white wire to W/B? Any help would be greatly appreciated.
  • Jan 30, 2010, 10:05 AM
    hvac1000
    Sounds logical to me but make sure you run the setup and do any switch changes for your type of system. If it uses batterys make sure to install them correctly and they are fresh/new.
  • Jan 30, 2010, 10:54 AM
    mr_ed1972

    Thanks! I hooked it up that way and it's working great.
  • Jan 30, 2010, 12:15 PM
    hvac1000
    No problem enjoy your new stst.

    • All times are GMT -7. The time now is 03:58 AM.