I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would be appreciated.

Hi! dasses, welcome to AMHD :)

Quote:

---

Originally Posted by dasses

I have a bryant plus 80 series g furnace. Model 395CAV048111. My furnace will start a cycle but goes off. Then the led will flash 5 times, pause and then repeat the 5 flashes. Also, if I unplug the furnace it will reset and complete a cycyle, then it will start going off again. Any help would be appreciated.

---

:cool: Kudos to hvac1000 ;)

See here post #6 link to pdf:
docs.hvacpartners.pdf

I did not check for your problem. It may be on a different page.

k

Edit:
Everywhere I looked, there are no references to a 5 then 5 error code.
The codes, and how to read them should be on a sticker inside the front panel.