Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Plumbing (https://www.askmehelpdesk.com/forumdisplay.php?f=259)
-   -   I replaced delta 1700 shower cartridge and it still leakes, what did I do wrong? (https://www.askmehelpdesk.com/showthread.php?t=436910)

  • Jan 19, 2010, 05:31 PM
    plumber girl
    I replaced delta 1700 shower cartridge and it still leakes, what did I do wrong?
    I replaced my 1700 Delta shower cartridge with a new one from the company. I replaced it and now a week later it is leaking again. Did I do something wrong.
  • Jan 19, 2010, 05:41 PM
    afaroo

    You may have dirt inside the valve, shut the water to the shower remove the cartridge, turn on the water for a few seconds to flush out all the debris and install the cartridge check it out, Thanks.

    John
  • Jan 19, 2010, 05:42 PM
    ballengerb1

    Leaking at the handle or dripping from the shower head?
  • Jan 19, 2010, 05:58 PM
    mygirlsdad77

    Yes, where exactly is it leaking from.
  • Jan 19, 2010, 06:47 PM
    plumber girl

    Leaking from the water spout.
  • Jan 19, 2010, 06:56 PM
    afaroo

    It sounds like you have debris (dirt) inside the valve follow as I stated in my post #2, if that wouldn't help call Delta to send you a new cartridge for free no charge to you, good luck.

    John
  • Jan 19, 2010, 08:51 PM
    ballengerb1

    It is not always clear in the instructions but most of us grease the cartridge and sleeve with a small amount of silicone grease or plumbers grease, make install easier and increase the seal.
  • Jan 20, 2010, 07:45 AM
    afaroo

    Yep excellent advice Bob, Thanks.

    Regards,
    John
  • Jan 22, 2010, 09:09 PM
    plumber girl
    Quote:

    Originally Posted by afaroo View Post
    Yep excellent advice Bob, Thanks.

    Regards,
    John

    I will try the plumbers grease.. Thanks for the extra info.
  • Jan 22, 2010, 09:10 PM
    plumber girl
    Quote:

    Originally Posted by ballengerb1 View Post
    It is not always clear in the instructions but most of us grease the cartridge and sleeve with a small amount of silicone grease or plumbers grease, make install easier and increase the seal.

    I will try the plumbers grease... Thanks for the extra help!

  • All times are GMT -7. The time now is 10:22 AM.