Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Electrical & Lighting (https://www.askmehelpdesk.com/forumdisplay.php?f=105)
-   -   16 amp connection into a 32 amp (https://www.askmehelpdesk.com/showthread.php?t=434433)

  • Jan 12, 2010, 07:35 AM
    garaghuram
    16 amp connection into a 32 amp
    I have a single phase 230 v, 32 amp source which would be then connected to 32 amp power distribution units within few cabinets. To these distribution units various devices ranging from 10 to 13 amps would be connected.

    Would there be any issue in this connection?
  • Jan 12, 2010, 12:56 PM
    tkrussell
    Will need to use a fusible spur connection to hold the 16 amp fuses to protect this spur.
  • Jan 13, 2010, 03:15 AM
    garaghuram
    1 Attachment(s)


    Thank you for your response. Enclosing a setup pdf on the connection I am talking about. I am being told that these would not be a problem, however would appreciate your views further

    To help understand, Could you elaborate why the spur is required and how the spur is made up.

    What would be the issue if the spur is not available
  • Jan 13, 2010, 05:09 AM
    stanfortyman

    garaghuram, what country are you in?
  • Jan 13, 2010, 05:54 AM
    garaghuram
    UK

  • All times are GMT -7. The time now is 02:53 PM.