Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Smartvalve for tempstar sp80 (https://www.askmehelpdesk.com/showthread.php?t=434176)

  • Jan 11, 2010, 01:39 PM
    the wonderer
    Smartvalve for tempstar sp80
    How can I test my flame sensor to see if it is bad?
  • Jan 11, 2010, 02:27 PM
    wmproop
    Take it off,clean it with steel wool or sandpaper,, usually does the trick
  • Jan 11, 2010, 02:40 PM
    KISS

    Testing is done with a DC micoammeter inserted in circuit. Nominal value is about 6 uA.

    Agree with Sandpaper.
  • Jan 11, 2010, 02:51 PM
    hvac1000
    1 Attachment(s)
    test like this but to the valves/flame sensor value.

    • All times are GMT -7. The time now is 07:44 PM.