I have a newly installed TOTO Drake. It is leaking from the bolt holes.
I had a professional plumber install a new TOTO Drake tank and bowl. A couple of days later, it started leaking from the left bolt hole. The plumber returned and replaced the tank as he thought there must be a hairline crack. The leak started again the next day (from the same place.. left bolt hole). He returned and replaced the bowl. The next morning, I noticed the leak from the same area. This was the second tank and the second bowl! I used a mirror and looked under the tank where the bolt is... it appears that the washer is not flush with the tank and is unable to be flush because of a small ridge around the bolt hole. I looked at the non-leaking right bolt hole. The washer there is completely flush against the tank. Could I have two defective bowls? Could the ridge be misplaced in a certain lot of toilets? What to to? I have spent $$ on 3 plumbing visits and now will have to have another one. By the way, the tank seems solid on the bowl, does not move and the bowl itself does not rock and has got shims. Please help!