I have a 1993 ford taurus 3.8L V6 automatic GL. I need to replace my water pump. I removed the drive belt and took off the four water pump pulley bolts. I am having trouble removing the "bottom" water pump-to-engine retaining bolts. I can't see the "bottom" bolts and can't get any type of wrench to come close to the bolts. I am looking down on the engine. Any solutions?

Put the car on jack stands. Work from the bottom. You will probably be needing 10mm combination wrenches.

The "Tricks" in this link should give you several ideas that may help:

https://www.askmehelpdesk.com/cars-t...ml#post1375861