The impeller works the auger works put a new belt on the snow starts to come out the chute goes about six inches plugs no broken pin checked all I could

Hi,
How about a brand and model?
Peace,
Clarke

Craftsman 24" 5 hp 536886440 two stage

Hi,
Sounds like something is not coming up to speed. The manual covers adjustment, etc. at:
http://www.managemyhome.com/mmh/lis_...M/L0010540.pdf
Peace,
Clarke

I ve read this I did put a new belt on what and ajusted clutch what else speeds up impeller

Hi,
As a general rule engine speed which is often as high as 3850 RPM.
Peace,
Clarke

Seems to run real well but it was sitting not used for three years carb maybe ?

Hi,
Does the engine slow significantly when the auger is engaged? That would point to a carb problem.
Peace,
Clarke

No it runs great even when its trying to push the snow out the chute the auger and impeller never slow down we have watched them both while going into snow

Hi,
Did you use the original equipment belts? One of them is a custom size.
Peace,
Clarke

No I bought one at a auto parts store I ll try that thank you

Hi,
Part #'s are 581264MA(4L x 35.6) and 579932MA(3L x 33.13)
Peace,
Clarke
PS Anytime you opt for a non-OEM replacement, it is wise to ask for a Kevlar belt.