My Kitchen Sprayer Hose has a leak. It is not one that you screw into the bottom of the faucet, but has some sort of "Snap To Connect" connection made by the "Masco Corporation of Indiana". A web search for them does not reveal much information (they seem to make parts for the larger faucet manufacturer".

Can someone tell me:
1) how do I remove the old one.
2) where can I find a new one (i.e. what should I ask/search for)
3) how to place the new one on.

Thanks

What brand faucet do you have? Have you tried to unsnap it, lightly grease with plumber grease and reinstall?

I don't know the brand (No obvious labeling). It just came with the house :-)

Try what I said at the end of my last post. Totally repl;acing the faucet isn't a terrible idea and could be done for under $100.

Can you post a photo of the faucet and the snap-in connection ?

Quote:

---

Originally Posted by Milo Dolezal

Can you post a photo of the faucet and the snap-in connection ?

---

I have attached a scan of the tag that was on the hose.

Looks like we can narrow down the brand a bit. Masco Corporation: Delta Faucet Unfortunately only narrowing a little bit http://www.masco.com/our_products/plumbing.html

Quote:

---

Originally Posted by ballengerb1

Looks like we can narrow down the brand a bit. Masco Corporation: Delta Faucet Unfortunately only narrowing a little bit Masco Corporation: Plumbing Products

---

I suspect it is:
Delta Side Spray
Model Number RP39360

Unfortunately all the pictures show the spraying end, not the connector :mad: