Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Installing Ritetemp 6030 (https://www.askmehelpdesk.com/showthread.php?t=426485)

  • Dec 19, 2009, 02:15 PM
    dlewisva
    Installing Ritetemp 6030
    Ok, we have baseboard hot water running off a natural gas furnace controlled by an old thermostat. We also have a heat pump/AC unit that we use for AC in the summer and only as an emergency source of heat in the winter (typically not used at all) that also runs off a mercury based thermostat.

    In trying to install the Ritetemp 6030, is there a way to run both old thermostats into the Ritetemp? The heat pump/AC thermostat has the following wires: O, G, Y, W, R, E, C and X1. The NG furnace thermostat seems as if it only has 1 wire.

    Any help in getting this done would be appreciated (or telling me that it can't be done).

    Thanks!

  • All times are GMT -7. The time now is 04:14 AM.