Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   Rheem furnace trouble shooting guide (https://www.askmehelpdesk.com/showthread.php?t=424978)

  • Dec 14, 2009, 11:51 AM
    merle staten
    Rheem furnace trouble shooting guide
    Burner comes on and then chuts off as soon as the fan comes on has anyone seen this before and what can I try
  • Dec 14, 2009, 01:14 PM
    hvac1000
    I think you better call a on site professional since usually when that happens it is because the heat exchanger has a hole in it. I would rather have you be safe then try to guess what else it could be.
  • Nov 17, 2011, 08:57 PM
    tinner2002
    Sounds like it could be a bad proving switch for the indoor fan motor. When the board doesn't get a signal from the air switch, it assumes that the fan never came on. The board cuts off the gas automatically as a safety.

  • All times are GMT -7. The time now is 01:46 AM.