I have a denon surround receiver that is hooked up to a plasma screen,cable/dvr and dvd player. System was working properly. I turned off TV with harmony universal remote. Later turned on TV again and now the screen says component 1 no signal. No matter what I do I cannot get the video to turn on. I have sound but no picture. Can you help?

Thank you

bsager :confused:

Quote:

---

Originally Posted by bsager

I have a denon surround receiver that is hooked up to a plasma screen,cable/dvr and dvd player. system was working properly. I turned off tv with harmony universal remote. later turned on tv again and now the screen says component 1 no signal. no matter what I do I cannot get the video to turn on. I have sound but no picture. Can you help?

thank you

bsager :confused:

---

With a known working Video Cable(RCA) if that's what you have in the back of your DVD video out plug it straight to your plasma screen to video in 1 line 1 or any input available prior to this make sure you run to your Plasma TV's Video inputs first with a dvd running press the Input button and run through the screens RGB1, RGB2, Line 1, Line 2, Component 1 etc...