Ask Me Help Desk

Ask Me Help Desk (https://www.askmehelpdesk.com/forum.php)
-   Heating & Air Conditioning (https://www.askmehelpdesk.com/forumdisplay.php?f=150)
-   -   York furnace troubleshooting (https://www.askmehelpdesk.com/showthread.php?t=419917)

  • Nov 27, 2009, 09:46 PM
    kdweis
    York furnace troubleshooting
    York 92 % eff. Furnace will only start & run when I fill the inducer to trap hose with water. Will run about two to three hour and then shut down on # 3 error ( pressure switch) .Please help!
  • Nov 27, 2009, 09:52 PM
    Joshdta

    Sounds to me like it is getting 2 much water into the inducer motor. Is your drain clear? Is your unit a upflow or horizontal?
  • Nov 27, 2009, 10:07 PM
    Joshdta

    Is this a 2 stage gas valve, or single? Is the trap box leaking?
  • Jun 13, 2010, 07:54 PM
    kdweis

    Unit is up flow... single stage gas valve.. trap box is not leaking externally . Have re leveled furnace as it was leaning slightly backwards... dropped front by .25 " hope that will help.
  • Nov 14, 2012, 11:56 AM
    EdLowery
    I have a york furnace diamond 90 upright. It lights for about three minutes then the flame goes out, then it relites. What could my problem be.

  • All times are GMT -7. The time now is 05:52 PM.