Hello all,

Perhaps someone can direct me. I have looked at every hardware store, and Home Depot, and Lowe's locally to find a front diverter with a female 3/4" threaded end. Whoever built the house installed a plastic extension that is adhered to the copper pipe. I do not know how to replace the plastic, it would be much easier to find the proper diverter. If anyone can help me locate one I would be grateful. I have found plenty that have a 1/2" fitting with an extension adapter that steps up to 3/4", but I need one that is 3/4" at the front of the diverter. Thank you all.

Hi llayne :)

Please clarify. Where is the "plastic extension that is adhered to the copper pipe" that you are speaking of?

And what do you want to use the diverter for?

Click on; http://www.plumbingsupply.com/tubspouts.html and scroll to the bottom of the page and check out the 3/4" Fips Front style diverter spout.
This will accept a 3 3/4" nipple. Good luck, Tom