Kenmore front load washer Mod.# 970-C45192-00, fills, tumble and drains only, no spin during the cycle. The display in any cyle goes to blank when it reaches the last 7 minutes beeps as complete and stops with no final spin. Is this a control board or motor speed board or other ? Thanks for the reply

There should be an access panel on the front below the door. Remove this and on the inside walls there should be tech papers on how to put it in test mode. Good luck.

Looked for one behind the bottom panel and nothing found. Can't get any from the web or Sears, any more info.
Thanks