I replaced the ignitor on my furnace. The ignitor will glow and the gas to the burners will come on and then the ignitor will go off and the gas at the burner dies out. Any suggestions?

Gas pressure, or control board problem, this is the 4th post on goodmans not lighting this week. None has got it to work yet.

Also see

Goodman GDH8 lockout, Service Nightmare
Post in the hvac section. Has 35 posts of things to try.

If the burners actually ignite, then promptly snuff out, try cleaning the flame sensor. It is the ceramic-insulated steel rod that it situated opposite the ignitor, with a single wire connected. If ignition never occurs, the problem lies elsewhere.

Cant' get enough goodman problems kc

Quote:

---

Originally Posted by Joshdta

cant' get enough goodman problems kc

---

Plenty here in town... come on over if you are feeling deprived in WVA... :D

I know what you mean, we got goodmans and arco's taking over here. Let the chaos begin!!