I have a leak in the wax ring under my commode. What are the steps to properly remove the commode, the old wax ring and replace all?

Replacing A Toilet Wax Bowl Ring - Fixing The Constant Foul Odor In The Bathroom

All with photos and very detailed

Setting a toilet is a simple job. Tile or lay the Congoleum up to the floor flange. Put the closet bolts in the flange slots. Now place the wax seal on the flange,(see image) and set the bowl so the bolts come up through the holes in the base . Give the stool a twist to seat the seal. Now is the time,if you have china caps, to put the plastic locking wafer on the bolt first, Making sure the beveled side is down, now the washer and nut. DO NOT OVER TIGHTEN as you can break the china. If you tighten it so that you can't twist it it's tight enough. Tie in the water and test for leaks. Final step is to take a small tube of DAP tub and tile caulk and grout around the base. Clean the excess off with a damp cloth. Congratulations, you have just set your commode. Hope this helps and thank you for rating my reply. Tom