I have correct code and Serial # but code does not work. I s any body know any solution.
![]() |
I have correct code and Serial # but code does not work. I s any body know any solution.
If you are certain you have the right code, but the radio is locked, you can disconnect the battery for a minute and then try again. Before you start again, you may want to double check that you have the correct serial #. You can do this by turning on the radio, when CODE appears, turn off the radio. Pres & hold preset buttons 1 & 6 and turn power back on. If the screen is large enough, it will display the 8 digit serial #, if not, it may toggle between 2 sets of numbers. Combine the numbers, ignoring the alphabets and you'll have your serial number. Just because you have a radio card, it doesn't mean it's the correct one.
Thanks for help but still not working. I disconnected battery also for five minuts but still it is not working. Serial number I have on card is exactly matching what I see if I press 1 and 6 on radio. I have no idea what is wronge. I was out of town for three weeks and wehen I came back then it was desplying this code before this it never happened. I believe if serial number is correct then code on card is also correct.
Are you putting in the serial number or the code? The code is only a 5 digit code. You can PM me your serial number if you'd like and I'll see if I can get you your radio code
Thanks again for help.
Here is S # 30029947
You are not set up for private message, and I am not going to post it on here publicly. So, if you want you can PM me and I'll see if I can help. Have you been putting in your serial # as opposed to the code?
I am entering code that is 5 digit.
Can someone please help me with my radio code. Serial # 30014217
Thanks
Did this ever get fixed? I am having sam problem and find it very frustrating. I have a 2003TL also.
All times are GMT -7. The time now is 03:59 PM. |